Climate Control For Industrial Painting

Industrial PaintIf you are looking for climate control solutions for your industrial painting project, DRYCO has you covered. We know that controlling the environment for your large industrial painting or coating project is critical to the success and endurance of the final product. We are your premier source for appropriate climate control equipment for your unique circumstance.

Industrial Surface Preparation

When planning for a large scale painting and / or coating project, the safety of your employees must be considered. You also want to make sure you get the most out of each application. Benefits of climate control for industrial surface preparation and application include:

  • Drying Cleaned Surfaces For Adhesion
  • Ventilation During Abrasive Blasting
  • Dehumidification Before Application
  • Fans & Dehumidification For Surface Drying And Curing

Care must be taken to protect operators and other employees in accordance with state and federal guidelines. The dust formed from blasting may contain particles that could present respiratory, fire and explosion hazards. You can rely on our ventilation and dehumidification equipment to ensure the safety of your workers and facilities.

Climate Control For All Surfaces

Types of surfaces that may require climate control during industrial painting and coating application can vary greatly. Temperatures and absorbency of materials can affect every step of the painting process.

  • Wood
  • Aluminum
  • Steel
  • Concrete
  • Galvanized Metal
  • Stainless Steel

Our dehumidification equipment is essential in preparing your surface before coating or painting to ensure the longevity of project results. In the case of metals, the temperature should be maintained at a level dependent on the specific material to avoid condensation and rust. If done improperly, this prevents the paint or coating from adhering. Since concrete must be cured to an acceptable moisture emission rate, dehumidification equipment can expedite the process, saving you time and money.

Prepare And Protect Industrial Projects

Once your project surface has been cleaned, our industrial fans can be used to remove any remaining moisture. Moisture levels must then be maintained until painting occurs. Some industrial painting and coating projects that can benefit from climate control include:

  • Bridge Painting and Coating
  • Commercial Buildings Preservation
  • Industrial Roofing Maintenance
  • Marinas and Repair Docks
  • Industrial Pipelines
  • Storage Tanks
  • Wind Turbines

Our dehumidification equipment can control the environment in the work area, allowing you to blast larger areas at once without stopping for priming until the entire project is completed.

Industrial Surface Drying and Curing

Our dehumidification equipment can prevent moisture condensation and expedite the release of solvents in the curing process. Lower humidity can also prevent solvents from becoming trapped in the film of coatings. We carry commercial and industrial fans and blowers of every size and type to speed the drying and curing of your painting project.

Control Surface Climates Today

DRYCO is the premier provider of climate control equipment for your large scale industrial painting or coating projects. Contact us today to ensure that these applications will not only stand the test of time but be completed quickly and with a minimum of expense to you.